ISFDB:Personal Linux Website
Follow these instruction to create a version of the ISFDB to run on your home Linux system. These instruction do not include setting up the ISFDB wiki.
Setup the Web server
The ISFDB code relies on a web server. Apache is a good choice for this. The basic instructions are:
Many Linux distributions will include Apache as a package in their repository. This may be called 'apache', 'httpd' or some variant thereof. Alternatively you can download and install from the Apache Software Foundation:
- Download the software. For Linux this is generally a source distribution, found at http://httpd.apache.org/download.cgi.
- Following the build instructions. In general, you should expect to uncompress, untar, run configure, run make, and run make install. The latter command will probably need to be run as a user account with root/sysadmin privileges.
Running the web server
Regardless of how you installed Apache, you will almost certainly need to configure it to start automatically after a boot. The exact method depends on how your Linux system manages the startup process. All of the following will need to be done by a user account with root/sysadmin privileges.
Linux system using init.d scripts
First copy the startup/kill script from the apache installation to the standard Linux location:
cd /usr/local/apache2/bin cp apachectl /etc/init.d/httpd
- Next setup the Start and Kill scripts from runstate 3 by creating symbolic links:
cd /etc/rc3.d ln -s ../init.d/httpd S85httpd ln -s ../init.d/httpd K85httpd
- Next setup the Start and Kill scripts from runstate 5 by creating symbolic links:
cd /etc/rc5.d ln -s ../init.d/httpd S85httpd ln -s ../init.d/httpd K85httpd
- Finally, if you want to startup Apache without a reboot:
cd /etc/init.d sh httpd start
- You should now be able to point a browser at your machine's IP address (or localhost) and see something.
Linux system using systemd
Many newer Linux distributions have switched to Systemd. To cause Apache to be started at boot time, do:
systemctl enable httpd
(It is possible the "httpd" service name might be something else on your system, e.g. "apache".)
This does not start Apache running immediately, this can be done by doing:
systemctl start httpd
To stop a running Apache server, or to disable Apache from starting at boot time, you can respectively do:
systemctl stop httpd systemctl disable httpd
There are many other systemctl subcommands, which are documented on the man page.
Set up the MySQL server
For this step, follow the Linux instructions found in ISFDB:MySQL_Only_Setup#Linux_Installation. This will load in the current version of the ISFDB data.
Install Python 2.5.4. You can download it from python.org. Note that earlier and later versions of Python may not work with the ISFDB software.
MySQLdb is a python module that allows a python script to interface with the MySQL database. The module includes C code, so it requires the standard Linux development tools. It uses the MySQL libraries, so MySQL must be installed prior to this step. Finally, it is installed in the python modules area, so python must be installed prior to this step.
1. Install the development tools. This contains the C compiler, which is needed in order to compile and link elements of the MySQLdb module. You can test if the development tools are present by typing cc. If cc is present it will output:
$ cc cc: no input files
If the tools are not present you will see:
$ cc -bash: cc: command not found
2. Install python-devel. This module is required in order to install additional python packages, such as MySQLdb. Your version of python may already have this module installed.
3. Install the MySQLdb python module. This can be found at http://sourceforge.net/projects/mysql-python. At this point python will be able to interact with MySQL.
Download the ISFDB Source
Use your browser to download the latest version of the ISFDB software from SourceForge.
Install the ISFDB
1. Edit common/localdefs.py:
DBASE = "isfdb" DBASEHOST = "localhost" DO_ANALYTICS = 0 HTFAKE = "/your_host_name/cgi-bin" HTMLHOST = "your_host_name" HTMLLOC = "your_host_name" PASSWORD = "" PROTOCOL = "http" USERNAME = "isfdb1" LEGACY_PASSWORDS= 1 UNICODE = "iso-8859-1" WIKILOC = "your_host_name/wiki"
Note that you will want to set LEGACY_PASSWORDS to 1. This will use the old md5 hashing algorithm when logging into your system. This will match the md5 algorithm used by create_user.py to create an account.
2. Then edit isfdb/INSTALLDIRS:
INSTALL_CGI = Local CGI binary directory INSTALL_HTML = Local HTML directory
3. Check the directory permissions on your INSTALL_CGI and INSTALL_HTML directories. You'll either need to do the install as a user who has permission to write there or you'll need to modify the permissions on the directories.
4. Then execute:
cd isfdb make -B install
The "-B" is needed only the first time, or you will get an error about not knowing how to build ".TARGETS". Subsequent rebuilds do not need this. The build process requires your default version of Python to be some flavor of v2, otherwise you will get errors about "SyntaxError: Missing parentheses in call to 'print'". You can verify the version of Python by running 'python --version', and if necessary set up a new Python environment using a tool such as virtualenv.
5. Save copies of your versions of isfdb/INSTALLDIRS and isfdb/common/localdefs.py someplace safe. If you download a new version of the ISFDB software and someone has checked in new versions of those files, you'll need to restore your settings before rerunning "make install".
Configure Nightly Processing
Enable ISFDB Editing
The ISFDB relies on MediaWiki to register users. In the personal Linux setup without the Wiki, this is not possible. A script is provided to update the appropriate tables to allow editing permissions. After everything is installed and you are able to view pages in the isfdb, execute:
isfdb/scripts/create_user.py LoginName password
This will insert the login name and encrypted password into the correct tables. By default, the new user will be a moderator as well as a bureaucrat. If you want to create a non-privileged user, pass "0" as the third parameter.